Primian-2™ SmartStart Modules
Cells			2	3	4	5
Module			5 pole ballast switching, with 30 seconds cathode heating
Standard			S2C	S3C	S4C	S5C
AutoTest® 3 hour			AS2C/D/P	AS3C/D/P	AS4C/D/P	AS5C/D/P
AutoTest® 1 hour			AS2C/M1/D/P	AS3C/M1/D/P	AS4C/M1/D/P	AS5C/M1/D/P
Case Type			Ap 30 mm	Ap 30 mm	Ap 30 mm	Ap 30 mm
Lamp		Watts	Figures quoted are ballast lumen factors, %
T5		4	38	27	34	59
		6	28*	30	36	59
		8	27*	30	35	63
		13		19*	35	33*
		14		15*	26	26*
		21			18*	24*
T5C		22			15	20*
T8		18			31	17*
		36			10*	14*
		58
		70
SEL		5	34	26	30	44
		7	23*	24	30	51
		9		32	36	54
		11		22*	24	32*
DEL		10		12	26	55
		13		26*	27	32*
		18			16	22*
		26			18*	21*
TEL		13			10	28*
		18			20	22*
		26			14*	22*
		32
TC-L		18		15	18	29
		24			14	18*
		34			15*
		36			11*	17*
		40
2D		16		18*	21	30*
		21			23*	31*
		28			14*	19*
		38				16*
		55				9*
F		18		13	16	25
		24		10*	18	17*
		36			9*	16*
Data also applies to 1 hour duration modules
These modules are not suitable for remote mounting above 0.5m.
Where BLFs are entered in red or marked * - remove link

Page Ref: WP0056 Issue 02  February 2009